Use whole servo closed loop control

Adopt vacuum check technology

Servo lateral locating,digital locating.Set location distance just on the upper computer,be capable of setting every lateral locating distance separately,high efficient in servo location.

Spinning part adopts electronic control and cooperates with robot joint reducer(back interval less than 1arc.min).Be capable of setting spinning degree randomly(set by upper computer) and setting each string’s spinning angle separately.

Glass location device is hand wheel type and intensifying type.The time to change glass is short and no need to use other tools like wrench.

6 opening system and reserving about 30 percent hardware interfaces,which is convenient to the interface control of equipment and auxiliary devices.

ITEM

Specification

Working   voltage

AC380V,3   Phase 5 Lines,50Hz

Rated   power

7KW

Working   air pressure

0.5-0.8Mpa

Average   Air Consumption

≧600L/min

Driving   mode

Servo   driving

Positional   accuracy of cell strings

±0.3mm

Tact

60s

Interval   of cell strings

1~10mm(adjustable)

QTY of   cell strings

4~12strings(adjustable)

Switching   time

≦15min

Breakage   rate

≦0.3%

Cell   main grid line number

2-5grids,switching   time≦30min

Applicable   Module Size

L(1600-2300mm)*W(800*1200mm)

Material   of transmission belt and sucker

PU

Overall   Dimensions

2470mm*4180mm*2800mm(L*W*H)

Total   weight

About   2500kg

Control   system

Screen(MCGS),Chinese/English   mode,supporting remote maintenance,and connection to local   production-management software.

Operating   mode

Manual/Automatic

Equipment   Function:Cell strings laying up machine,working with Stringer by 1 VS 1,or 1   VS 2.

Cell strings are in parallel with the long side of the modules after conveyed in the Automatic Layup Machine,and adjusted mechanically and by CCD.